Product Description
Sonnax 77918S-1K 4L60E 4L65E Replacement Stator Shaft.
This Is A New Sonnax Brand Replacement Stator Shaft For 280mm And 300mm Torque Converter 1999-2004.
THIS SHAFT HAS NO ISS (INPUT SPEED SENSOR) HOLE!!!!!!
280mm or 300mm Converter, Non-Reluctor style, 1999-2004, With bushings installed.
This Stator Shaft Will Fit These Automatic Transmissions;
GMC CHEVY BUICK CADILLAC OLDSMOBILE PONTIAC
4L60E 1999-2004 WITH THE 280mm or 300mm CONVERTER and NON-RELUCTOR TYPE.
4L65E 2001-2004 WITH THE 280mm or 300mm CONVERTER and NON-RELUCTOR TYPE.
THIS IS A 100% SONNAX GENUINE STATOR SHAFT!
THIS LISTING IS FOR (1) ONE STATOR SHAFT KIT THAT COMES THESE ITEMS,
NEW SONNAX 77918S-1K 280mm / 300mm STATOR SHAFT WITH BUSHINGS INSTALLED.
Part No. 77918S-1K
280mm or 300mm Converter, non-reluctor style, 1999-2004, With bushings installed
Shaft Length: 7.300"
Sonnax stator support shaft assembly 77918S-1K eliminates sleeve rotation by mechanically fastening the sleeve in place with a set screw, further securing the sleeve in place with Loctite®. The assembly is 100% leak tested by Sonnax to ensure a secure seal. Shafts have slotted bolt holes for easy alignment during installation.
Set screw and Loctite eliminate sleeve rotation
Slotted bolt holes for easy installation
No machining required
Bushings installed
THIS STATOR SHAFT KIT WILL ADDRESS THESE ISSUES WHEN PROPERLY INSTALLED,
Main Complaint
Delayed reverse
Code 1870
Worn stator ring lands and splines
Secondary complaints
No 3rd gear
3-4 clutch failure
Converter overheat
Cause
Overheating and manufacturing flaws cause sleeve rotation and block oil flow, which leads to transmission failure.
Correction
Replace worn or damaged stator shaft with this Universal Stator Support Kit.
Universal Stator Support Shaft Kits,
FEATURES AND BENEFITS
Sonnax exclusive set screw positively prevents sleeve rotation.
Sonnax exclusive assembly and testing procedures ensure reliability.
77918S-1K fits all 4L60-E and 4L65-E with the 280mm and 300mm torque converter.
These stator shaft kits have slotted bolt holes for easy installation without any machining required.
100% Leak Tested
77918S-1K is about 1/2" longer and fits 1998-2004 models with 300mm converter.
Kit comes with bushings installed.
SONNAX PART SUMMARY
Current aftermarket replacement shafts are known to have several problems that can lead to transmission failure. The internal sleeve can rotate, blocking oil flow. The internal passages can cross leak. Metal chips can be hidden inside that cause transmission damage when oil flow carries them throughout the trans. The Sonnax 77918S-1K kits have unique features that eliminate sleeve rotation by mechanically fastening the sleeve in place with a set screw, Lactating the sleeve in place, and 100% leak testing assemblies.
THESE SHAFTS WILL NEED TO BE PRESSED INTO THE STATOR HOUSING.
THIS SHAFT WILL WORK IN 280mm and 300mm 1998-2004 CONVERTERS ONLY.
