4R100 ALTO Kryptonite Overdrive Powerpack Clutch Kolene Steels Kit 1998-ON OD HD

Overview
Reviews

Product Description

4R100 NEW OVERDRIVE CLUTCH ALTO "KRYPTONITE" POWERPACK 1998-ON*.

THIS IN A NEW ALTO "KRYPTONITE" POWERPACK.

ALTO NO LONGER OFFERED THE "RED-EAGLE" FRICTION PLATE FOR A WHILE ON THIS APPLICATION AND HAS REPLACED IT WITH THE SUPER DURABLE "KRYPTONITE" PLATE.

*THIS KIT MAY COME IN RED-EAGLE DEPENDING ON STOCK ON HAND AT THE TIME OF THE SALE.

BOTH FRICTION MATERIALS ARE OF EQUAL PERFORMANCE, DURABILITY AND TOP ALTO QUALITY.

THIS ALTO "KRYPTONITE" POWERPACK WILL FIT THESE AUTOMATIC TRANSMISSIONS,

4R100 1998-ON ONLY WHEN THE STAMPED STEEL DRUM IS USED.

THIS ALTO "KRYPTONITE" POWERPACK COMES WITH THESE ITEMS;

(4) ALTO KRYPTONITE (OR RED-EAGLE) OVERDRIVE FRICTIONS WITH 32 TEETH/SPLINES.
(4) ALTO KOLENE OVERDRIVE STEEL PLATES.
(1) ALTO NON KOLENE SPECIAL POWERPACK PRESSURE PLATE.

ALTO PART # 026758
Alto # 026758 POWERPACK® CONTENTS:
(4) 026722B177 (.070” / 1.77mm) Kryptonite® or Red-Eagle® Friction Plates
(4) 026723K200 (.080” / 2.0mm) Kolene® Steel Plates
(1) 026763-487 (.192” / 4.87mm) Top Pressure Plate (Non-Kolene)

THIS KIT WILL NOT WORK ON THE CAST IRON TYPE COAST DRUM.

Note: Always pre-soak friction elements for at least 15-20 minutes in manufacturer recommended ATF.

INSTALLATION INSTRUCTIONS
Stack up is the same method as OE. Start the stack-up with a steel plate. Alternate with a friction plate
until all frictions and steels are used.
The overdrive clutch pack clearance should be set at .022” to .047” (0.55mm – 1.20mm).

ALTO PART # 026758

CT POWERTRAIN PART # K36103A-HP

THIS IS A MUST REPLACEMENT FOR EVERY HIGH-PERFORMANCE REBUILD!

ALTO FRICTIONS ARE
100% MADE IN THE USA

THESE ARE THE KITS THE PROFESSIONALS USE. DON'T SETTLE FOR LESS.

After purchasing, pay instantly with your credit card through PayPal!