Product Description
Raybestos Stage1 Maxpac 3-4 Clutch Update For 700R4 4L60E 4L65E 4L70E All Years*
This Is The Raybestos Stage1 Maxpac 3-4 Clutch Update Kit For These GM Automatic Transmissions;
700R4 All Years*
4L60 All Years*
4L60E All Years*
4L65E All Years*
4L70E All Years*
*Please Note: To Use All 8 Frictions In Some Models You Will Need To Use The Proper Apply Ring Below:
Also Note: You may sometimes have to use a different size snap-ring to set proper clearance
The MaxPac increases torque capacity and heat dissipation of the 3-4 clutch pack by increasing the number of friction surfaces without sacrificing steel plate thickness, clutch pack clearance, or requiring specialty snap rings. By installing the MaxPac with the Raybestos high energy friction plates, the 3-4 clutch pack not only offers increased holding capacity under high loads, but also adds increased temperature stability to an area known for heat fatigue. This kit can be used for both heavy duty and high performance applications, utilizing the Raybestos STAGE 1 High Energy material performance friction plates.
"THE FINAL ANSWER"
RAYBESTOS MAXPAC
FOR REDUCING 3-4 CLUTCH PACK FAILURE
THIS KIT CONTAINS THE FOLLOWING ITEMS;
(8) Raybestos STAGE 1 Red High-Performance friction clutch plates at 0.062" thick.
(7) Raybestos or ALTO non-kolene high quality steel plates at 0.078" thick.
(1) Raybestos or ALTO non-kolene high quality steel apply plate at 0.125" thick
(1) Set of install instructions and tech tips.
