Product Description
Sonnax 700R4 4L60E Replacement Stator Shaft 77918S-K New 1982-2004 Non 300mm Type.
This Is A New Never Opened Sonnax Brand Replacement Stator Shaft For 27 And 30 Spline Input Shafts.
This Stator Shaft Will Fit These Automatic Transmissions;
GMC CHEVY BUICK CADILLAC OLDSMOBILE PONTIAC
700R4 (4L60) 1982 THRU 1993 NON-ELECTRONIC.
4L60E 1993 THRU 2004 WITHOUT THE 300mm CONVERTER
Product Line Part Summary
Stator Support Shaft Kit
Part No. 77918S-K
Stator Support Shaft
Bushings (3)
298mm or 245mm Converter, non-reluctor style, 1982-2004, Universal bolt pattern
Shaft Length: 6.830"
Sonnax stator support shaft assembly 77918S-K eliminates sleeve rotation by mechanically fastening the sleeve in place with a set screw, further securing the sleeve in place with Loctite®. The assembly is 100% leak tested by Sonnax to ensure a secure seal. Shafts have slotted bolt holes for easy alignment during installation.
Set screw and Loctite eliminate sleeve rotation
Slotted bolt holes for easy installation
No machining required
Bushings may need to be installed before use.
THIS IS A SONNAX GENUINE STATOR SHAFT!
THIS STATOR SHAFT KIT COMES THESE ITEMS,
NEW SONNAX NON 300mm STATOR SHAFT.
NEW SONNAX FRONT SHAFT BUSHING FOR 27 SPLINE INPUT SHAFT.
NEW SONNAX FRONT SHAFT BUSHING FOR 30 SPLINE INPUT SHAFT.
EASY TO FOLLOW INSTRUCTIONS.
THIS STATOR SHAFT KIT WILL ADDRESS THESE ISSUES,
Main Complaint
Delayed reverse
Code 1870
Worn stator ring lands and splines
Secondary complaints
No 3rd gear
3-4 clutch failure
Converter overheat
Cause
Overheating and manufacturing flaws cause sleeve rotation and block oil flow, which leads to transmission failure.
Correction
Replace worn or damaged stator shaft with this Universal Stator Support Kit.
Universal Stator Support Shaft Kits,
FEATURES AND BENEFITS
Sonnax exclusive set screw positively prevents sleeve rotation.
Sonnax exclusive assembly and testing procedures ensure reliability.
77918S-K fits all 700-R4/4L60-E without 300 mm torque converter. Kit comes with two front bushings to match input shaft diameter.
These stator shaft kits have slotted bolt holes for easy installation without any machining required.
100% Leak Tested.
SONNAX PART SUMMARY
Current aftermarket replacement shafts are known to have several problems that can lead to transmission failure. The internal sleeve can rotate, blocking oil flow. The internal passages can cross leak. Metal chips can be hidden inside that cause transmission damage when oil flow carries them throughout the trans. The Sonnax 77918S-K kits have unique features that eliminate sleeve rotation by mechanically fastening the sleeve in place with a set screw, Lactating the sleeve in place, and 100% leak testing assemblies.
THESE SHAFTS WILL NEED TO BE PRESSED INTO THE STATOR HOUSING.
THIS SHAFT WILL NOT WORK IN 300mm 1998-ON CONVERTERS.
PLEASE NOTE: TRANSMISSION REMOVAL, DIS-ASSEMBLY AND RE-ASSEMBLY REQUIRED TO INSTALL THIS ITEM.
ALSO NOTE: SPECIAL BUSHING DRIVING TOOLS MAY BE NEEDED FOR PROPER INSTALL, PROFESSIONAL INSTALL RECOMMENDED.
