Product Description
E4OD C6 NEW REVERSE CLUTCH ALTO "RED-EAGLE" CLUTCH PACK 1966-97 WITH CAST IRON LOW DRUM 72 TOOTH TYPE FRICTIONS.
THIS IN A NEW ALTO "RED-EAGLE/KOLENE" CLUTCH PACK.
THIS ALTO "RED-EAGLE" CLUTCH PACK WILL FIT THESE AUTOMATIC TRANSMISSIONS,
- C6 1966-ON
- E4OD 1989-97 WITH CAST IRON LOW DRUM.
THIS ALTO "RED-EAGLE" CLUTCH PACK COMES WITH THESE ITEMS;
- (6) ALTO RED-EAGLE REVERSE FRICTIONS WITH 72 TEETH FOR CAST IRON LOW DRUM.
- (6) ALTO KOLENE REVERSE STEEL PLATES.
ALTO PART # 026744UP6 & 026703KUP6
CT POWERTRAIN PART # K36504HP-A
THIS IS A MUST REPLACEMENT FOR EVERY HIGH-PERFORMANCE REBUILD!
INSTALLATION INSTRUCTIONS:
Stack up is the same method as OE. Start with the bottom apply plate. Then alternately install the friction and steel plates starting with a steel and ending with a friction plate. Install the top pressure plate and the snap ring.
Apply air to assembled clutch pack several times to seat the friction and steel elements. Use a feeler
gauge to measure between the bottom of the selective snap ring and the top of the pressure plate.
Note: Always pre-soak friction elements for at least 15-20 minutes in manufacturer recommended ATF.
ALTO FRICTIONS ARE
100% MADE IN THE USA
THESE ARE THE KITS THE PROFESSIONALS USE. DON'T SETTLE FOR LESS.
<td a
| After purchasing, pay instantly with your credit card through PayPal! |
 |
