Product Description
New TransGo 48RE 2003 Thru 2008 SK48RE Shift Kit.
This Is A New Sealed Never Opened TransGo Shift Kit For These Automatic Transmissions:
CHRYSLER DODGE JEEP
- (48RE) 2003 THRU 2008 DIESEL & 2003 V10
- MAY WORK UP TO 2010
This Kit Is For The Torqueflite / Loadflite Overdrive Transmissions.
This Listing Is For (1) One Kit.
This Kit Will Provide These Upgrades When Properly Installed:
Corrects / Prevents / Reduces:
- Lube shortage
- Soft shifts
- Reduces drainback
- Increases Torque Capacity
- Adjust Lockup & Shift Firmness
- Reduces converter slip.
- Has Hi-Temp Low Shrink Rings
- Perfect for Dodge Diesel , Gas Trucks and Heavy Duty Diesel.
- You’ll hardly believe how powerful the shifts can be without being bangy.
- This kit includes the TRANSGO Heavy duty Updated Valve-Body Separator Plate
48RE Application Reference;
8th VIN digit = C 48RE Transmission
8th VIN digit = 6 47RE Transmission
ONLY WORKS ON 48RE
THIS KIT CAN BE INSTALLED WITH THE TRANSMISSION IN OR OUT OF THE VEHICLE
BUT TO INSTALL THE TEFLON SEALS UNIT MUST BE OUT AND PUMP REMOVED.
TRANSGO PART: SK 48RE
CLASSIFICATION: SHIFT KIT
FITS: 2003-08 48RE Diesel & 03 V10
FEATURES: You'll hardly believe how powerful the shifts can be without being bangy. Reduces converter slip. Has Hi-Temp Low Shrink Rings. Good for Heavy Duty/Towing and High Performance use. Includes new stronger replacement Separator Plate.
Upgraded with New TCC Boost tuning plate added 2016
Special Instructions: Professional installation recommended. Does not require transmission removal. But for Teflon Seals Unit must be out of vehicle.
This TransGo 48RE SHIFT KIT® Valve Body Repair Kit fits 2003 to 2008 Dodge and Ram vehicles equipped with the 48RE automatic transmissions with a gas or diesel engine. Common complaints on this transmission are TCC slip or shudder, 2nd gear band and direct clutch failure as well as torque converter drain-back.
Features and benefits:
The TransGo kit includes valve body and internal components that are designed for higher operating pressures. As a result, with MAX main line pressure set to 115 psi in 1st, 2nd and 3rd gear and up to 160 psi in 4th or in lock-up, this kit provides a significant increase in torque capacity for all of the friction elements including the TCC clutch. These elevated pressure specs are ideal for the heavy-duty work truck as well as for pulling the fishing boat to the loading ramp. With the kit installed it brings a whole new driving experience to the truck while keeping the shift timing at the OE RPM’s for the optimal engine power curve. Therefore, the shifts are short and clean with no harshness, bang’s or clangs.
There are several innovative components in this kit. For instance, our line-to-converter feed system which helps the unit run cooler and promotes longer TCC clutch life. Also included is a TransGo pioneered manual valve to reduce overnight forward and reverse delayed engagement complaints due to torque converter drain back.
Lastly, this kit can be installed with the transmission in the truck. On the other hand, there are internal sealing rings furnished in the kit if the transmission is on the bench for overhaul.
Corrects/Prevents/Reduces:
TCC slip or shudder
Reduces converter drain-back
2nd band failure
3rd clutch failure
Increases TCC and clutch element torque capacity
Improves TCC engagement feel
Provides short clean shifts
Includes:
(3) High-temp low shrink sealing rings
Lower 1-2 accumulator spring
Throttle valve spring (for optional later upshifts)
Part throttle body transfer plate, pin and detent limit valve spring
Part throttle valve spacer (for units with TTVA motor and modified computer programming)
USA-made hardened steel manual valve with converter charge in park provision and cherry bomb
Mumbly peg (for easy detent spring and ball installation)
(3) 3-4 accumulator springs and plug for accumulator housing
Transfer plate, tapered plug, spring, checkball and limit bushing
3-4 quick fill valve spring
Main valve body separator plate
Solenoid body plate
PR valve shim, spring seat and inner spring for line-to-converter feed provision as well as outer spring for increased pressure
Boost valve bracket and optional tuning plate
(2) Drill bits
IT JUST AIN'T FIXED WITHOUT IT!!!!!
Product Videos
Custom Field
Product Reviews
1 Review Hide Reviews Show Reviews
-
2016 version!
Receive the product in great time and the best part is it's the 2016 version. Easy install!
