Product Description
SK4T60E-JR TransGo Shift Kit Fits 4T60E 1991-On.
Box May Differ From Photos.
This Is A New Trans Go SK 4T60E-JR Shift Kit For 4T60E 1991-on Overdrive (4 Speed) Automatic Transmission:
Corrects:
- Light Throttle Converter Shudder.
- Contains Hardened Pins And “Tuff” Accumulator Piston Seals To Reduce Clutch Failure Due To Pin And Seal Wear.
- 3rd Clutch Seal Is Self Expanding.
- Includes PWM Valve.
- Lock-up Regulator Valve & Bushings.
- Special Instructions: May Require Transmission Removal For Proper Installation (*See Notes Below).
Corrects / Prevents / Reduces:
- Codes P0740, P0742, P0756, P1870,
- Light throttle converter shudder/slip
- Won’t lock-up, falls in and out of lock-up
- Lock-up on top of 2nd
- No lockup and/or with hot codes
- 740, 85, 39, 80/90
- 2nd clutch burn-up
- Delayed or no 3rd cold
Also Includes:
- PWM valve
- Lockup regulator valve assembly
- Hardened accumulator pins and tough seals
- Upgraded self expanding 3rd clutch seal
**This Kit Will Only Fit 1991-on 4T60-E Front Wheel Drive 4 Speed Automatic Transmissions Only!!!
This Kit Will Not Fit 125/C (3T40), 4T40-E, 440T4, 4T65-E Or 4T80-E
*This Kit Can Not Be Installed From The Lower Pan And Must Be Installed Through The Side Pan And That Will Sometimes Lead To The Transmission Removal In Order To Install Properly.
