Product Description
Dodge 68RFE, 5-45RFE, 45RFE New As-Cast Aluminum Deep Transmission Pan.
Volume: 3 1/8 qts. over stock for 2wd, 2 1/2 qts. over stock for 4wd
Dimensions: Overall depth is about 1" more than stock. Click here for dimensions.
Number of Bolts: 15
This Dodge 68RFE, 545RFE, 45RFE deep transmission oil pan is a direct replacement on these vehicles:
- Ram 2500 & 3500, 2WD and 4WD, with 6.7 liter diesel engine, 2007½ and newer (Note that the 3500 HD cab & chassis has the Aisin transmission so this pan will not work and 5.9 liter diesel trucks, need pan Ebay item # 8075010716)
- Ram 1500 with Hemi engine, 2002 - 2005
- Ram 1500 with 4.7 V8 engine, 2002 and newer
- 2WD Dakota with 4.7 V8 engine, 2000 - 2004
- 2WD Durango with 4.7 V8 engine, 2000 - 2003
- Jeep Grand Cherokee with 4.7 V8 engine, 1999 - 2004
The following vehicles may have interference problems with a larger transmission pan. In some cases, the vehicle can be modified to allow installation:
- Ram 1500 with Hemi engine, 2006 & newer: The stock exhaust may hit a deeper transmission pan. Use dimensions provided below to check your truck for clearance.
- Ram 2500 & 3500 with Hemi engine: The exhaust crossover pipe is routed underneath the back part of the pan instead of in front of it like the 1500. The pipe must be rerouted downwards 1" in order to prevent it from hitting the pan. Click here to see an image of the stock pan and stock exhaust. Aftermarket exhaust systems are routed differently.
- 4WD Dakota 2000 - 2004 and 4WD Durango 2000 - 2003: The frame crossmember behind the transmission pan will interfere with a larger pan.
- Dakota 2005 & newer and Durango 2004 & newer: The frame crossmember behind the transmission pan will interfere with a larger pan.
- Durango with Hemi engine: A catalytic converter in front of and underneath the transmission pan will interfere with a deeper pan.
- Jeep Grand Cherokee with Hemi engine: A catalytic converter in front of and underneath the transmission pan will interfere with a larger pan.
- Jeep Liberty CRD: Requires removal of the factory skid plate, or addition of spacers to move the skid plate downward away from the transmission.
This pan is similar to our Ebay item # 260046691248 (part number 44-45R-840A-DEEP) but has less capacity, slightly less depth and has a lower price(capacity of 3 1/8 quarts compared to 4 1/2 quarts over stock for 2WD, 1/2 inch to 1 inch less depth). When Dodge decided to use the Hemi trans pan design on the new 6.7 liter diesel powered trucks, we knew that the trucks would see even heavier towing use and designed the deeper pan, part number 11039. Both pans fit the same applications with the same exceptions.
The filter attaches to the valve body (bolt on & spin on), and does not use the pan for support. The pan features internal baffles to direct oil to the filter inlet. Because the baffles keep the oil near the pickup tube, a filter extension is not needed. See an image of the pan interior.
(Black Powder Coated Pan shown in pictures, this listing is for a As-Cast pan Add $65.00 for Powder coating Service).
To see pictures of this pan installed on a 2WD 2007 Dodge Ram 2500 with diesel engine, click here, here, and here.
(Black Powder Coated Pan shown in pictures, this listing is for a As-Cast pan Add $65.00 for Powder coating Service).
To see pictures of this pan installed on an '02 Dakota Quad Cab 2wd click here and here.
(Black Powder Coated Pan shown in pictures, this listing is for a As-Cast pan Add $65.00 for Powder coating Service).
Transmission Pan Features
- Increased oil capacity for cooler temperatures
- Sand-cast aluminum with raised fins
- 3/16-inch thick wall construction to add strength to the transmission case
- 3/8-inch thick gasket flange will not bend when bolts are tightened
- Machined gasket surface for a secure seal
- Boss cast into pan can be machined for a temperature sensor
- Magnetic drain plug for easier, less messy maintenance
- Mounting hardware provided
Gasket and filter not included (use stock parts).
Gasket and filter not included (use stock parts).
We do sell the service kit and can add to the order at additional cost.
DUE TO THE HIGH DEMAND OF THESE PANS THERE MAY BE A ONE TO THREE WEEK BACK ORDER, SO PLEASE CALL OR EMAIL PRIOR TO YOUR PURCHASE TO CHECK STOCK. THANK YOU!!!
100% MADE IN THE USA
PLEASE MAKE SURE OF YOUR TRANSMISSION PRIOR TO
ORDERING YOUR ITEM.
CT POWERTRAIN PRODUCTS PART NUMBER: 44-45R-840-DEEP
