Product Description

4L60E New As-Cast Aluminum Deep Transmission Pan for 1997 Thru 2004 C5 Corvettes with the pan fill 4L60E.

Volume: 4.0 qts. over stock

Dimensions: Click here for dimensions.

Number of Bolts: 16

This PML extra capacity transmission pan fits 1997 - 2004 C5 Corvettes with the pan fill 4L60E transmission made by GM.

If you click on the as-cast image, a larger image will open and you can see the large fill hole near the gasket surface in the picture.

This Corvette transmission pan works with inexpensive stock gaskets and filters. The pan has cast-in filter supports so no filter extension is needed.

You may have to modify your shift cable mounting bracket to use this pan. If the trans pan mounting bolts hold the shift cable bracket on, please reference this article from Vette magazine for details.

Use a 4L60E early filter or 700R4 filter with this pan.

Transmission Pan Features

• Increased oil capacity for cooler temperatures
• Sand-cast aluminum with raised fins
• 3/16-inch thick wall construction to add strength to the transmission case
• 3/8-inch thick gasket flange will not bend when bolts are tightened
• Machined gasket surface for a secure seal
• Boss cast into pan can be machined for a temperature sensor
• Magnetic drain plug for easier, less messy maintenance
• Mounting hardware provided

Gasket and filter not included (use stock parts).

DUE TO THE HIGH DEMAND OF THESE PANS THERE MAY BE A ONE TO THREE WEEK BACK ORDER, SO PLEASE CALL OR EMAIL PRIOR TO YOUR PURCHASE TO CHECK STOCK. THANK YOU!!!